Bobcat S150 W4327 Error Code
W4327 Error Code
"Manbasket mode : Manbasket not detected on carriage with GACD on or Remote control active" is the main cause of W4327 error.The condenser converts gases into liquids, which expels heat from your rig. Materials can build up over time, causing a layer of dirt and grime to form on the condenser's coils. Your AC system will only blow hot air since the refrigerant fails to cool down.
Tip For S150 Model
When the temperature is below -30 C (-20 F), hydrostatic oil must be warmed before starting. The hydrostatic system will not get enough oil at low temperatures and will be damaged. Park the machine in an area where the temperature will be above -18 C (0 F) if possible.